SkyTrak 6036 Service Manual - Manual (Page 207)

7.29 Model 6036 Legacy
Engine: Cummins 4BT3.9
29. Place engine on a flat, level surface.
30. If replacing the engine, attach a lifting chain to the
front (Fig. 7-37, 13) and rear (14) engine lift bracket
and lift engine clear of the ground.
31. Remove the front right (Fig. 7-37, 7), and left (8)
engine mounting brackets and muffler bracket (15).
32. Remove the upper rear (Fig. 7-37, 2) and lower rear
(12) engine mount brackets from the engine. Inspect
isolators (16 and 17) and replace if worn.
33. Remove all radiator and oil cooler components from
the engine. (Refer to Section 7.6.3, “Radiator/Oil
Cooler and Coolant Heater Replacement.”)
Figure 7-37 Engine Component Location
MA9100
1
12
3
4
7
8
5
6
13
9
10
14
11
15
17
2
16
19
18
22
21 20
24
23