SkyTrak 6036 Service Manual - Manual (Page 131)

4.27 Model 6036 Legacy
Cab and Covers
Figure 4-44 Disconnect Control Cables at Joysticks
12. Vehicles equipped with auxiliary hydraulics only:
Remove the auxiliary hydraulics joystick assembly.
(Refer to Section 4.3.7, a. “Auxiliary Hydraulics
Joystick Removal.”)
13. Working under the cab, label and disconnect the
hydraulic hoses (Fig. 4-45, 1-8) at the cab fittings.
Plug the hoses and cap the fittings.
Figure 4-45 Disconnect Hydraulic Hoses
14. Remove six hex-head capscrews, six lockwashers
and six flat washers (Fig. 4-46, 1) securing the
access panels to the frame. Remove the upper (2)
and lower (3) transmissions covers.
Figure 4-46 Remove the Upper and Lower
Transmission Covers
15. Unlock and open the right engine access door.
WARNING:
Hydraulic fluid leaking under
pressure can penetrate the skin, cause
infection, gangrene, and death or serious
personal injury. If injured, see a doctor
immediately.
Relieve all pressure before disconnecting any
component, part, line or hose. Slowly loosen
parts and allow release of residual pressure
before removing any parts or component.
WARNING:
Wait for the hydraulic fluid
to cool before servicing any hydraulic
component. Hot hydraulic oil can cause severe
burns.
MA8520
2
3
1
4
5
6
7
MA8500
2
1
3
4
5
6 7
8
MA8620
1
~
~
2
3
1