Metrohm viva 1.0 Manual - Manual (Page 120)

3.6 Run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
108 ￭￭￭￭￭￭￭￭
viva 1.0
3.6.3 Single determination
3.6.3.1 Single determination - Overview
Tab: Workplace ▶ Run ▶ Single determination
Parameters and sample data for single determinations can be edited and
run functions can be triggered on the Single determination tab. It con-
tains the following tools and functions:
￭ Single determination - Operating elements
Buttons for starting, stopping, interrupting and resuming determina-
tions.
￭ Single determination - Status display
Display of the current status of the workplace.
￭ Single determination - Determination parameters
Entry of general parameters for the determination.
￭ Single determination - Sample data
Entry of method and sample identification for the next determination.
￭ Properties - Single determination
Definition of the properties for the Single determination tab.
3.6.3.2 Single determination - Operating elements
Tab: Workplace ▶ Run ▶ Single determination
The following operating elements are located on the Single determina-
tion tab:
Starting a single determination (Shortcut: Ctrl G)
This button is present in the status READY (no determination started). If
the start can be triggered, then it will be green, otherwise light gray.
Stopping a single determination (Shortcut: Ctrl S)
The button is present in the status BUSY (determination is running).