Metrohm viva 1.0 Manual - Manual (Page 787)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 Devices
viva 1.0
￭￭￭￭￭￭￭￭ 775
The determination ID can be copied and pasted into another field.
Integration time
Shows the integration time during recording of the dark spectrum.
Averaged spectra
Number of spectra recorded and averaged.
Smoothing
Shows the number of neighboring pixels with which the light intensity of
each pixel was determined.
Spectrum
Shows the reference spectrum. The graph can be zoomed with the
mouse. The whole spectrum is displayed again by double-clicking on it.
x axis
Shows the wavelength in nm.
y axis
Shows the intensity in Counts.
7.6.8 Properties - GLP
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ GLP
Tab: Configuration ▶ Dosing units ▶ [Edit] ▶ Properties... ▶ Dosing unit - 'Na-
me' ▶ GLP
Tab: Configuration ▶ Solutions ▶ [Edit] ▶ Properties... ▶ Solution - 'Name' ▶ GLP
GLP test date
Date of the last GLP test. This date can be selected by clicking on in
the Select date dialog window (see Chapter 2.4.1, page 67).
Comment on GLP test
Comment regarding the GLP test.
Entry 1,000 characters
Monitoring of GLP validity
on | off (Default value: off)
If this check box is activated, then the time interval for the GLP test is
monitored.