Metrohm viva 1.0 Manual - Manual (Page 842)

9.1 How to proceed?
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
830 ￭￭￭￭￭￭￭￭
viva 1.0
NOTE
If a variable is modified, then all selected determinations will be
recalculated with the new value by clicking on [Recalculate]. If a
variable is not modified, then the original variable values will be
used when several determinations are recalculated (i.e., variables
with the same name but different values will not be overwritten
until they are deliberately modified).
7 Click on [OK] in the Reprocessing dialog window.
Each determination that has been modified by reprocessing will be
saved as a new version with a version number increased by +1 and
the Reprocessing dialog window will be closed. This button is disa-
bled for as long as the recalculation has not yet been triggered and if
not all the selected determinations were able to be recalculated.
Modifying a method
NOTE
The method can only be modified if it is identical for all selected deter-
minations.
1 Change to the Method tab.
2 Click on [Modify method].
The Method editor dialog window opens.
3 Modify the method as desired.
You can both modify parameters of existing commands and enter
and delete commands and tracks.
4 Click on [OK].
5 Click on [Recalculate].
The selected determinations are recalculated. The results of this recal-
culation are entered automatically in the Result view subwindow.