Metrohm viva 1.0 Manual - Manual (Page 496)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
484 ￭￭￭￭￭￭￭￭
viva 1.0
￭ ADD SAMPLE DT - Properties
Command variables
The following command variables are generated by the ADD SAMPLE
DT command in the method run and can be used in formulas under the
designation 'Command name.Variable identification':
Identification Description
ACO Addition counter (Number) = current number of
completed runs of the command
BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command
has never been started
CYL Cylinder volume of the dosing unit used for the com-
mand
FIN Command status; 1 = Command has ended at
least once, 0, invalid (variable not available) =
Command has never ended
VOL Dosed volume increment in L (Number)
VOLTOT Dosed total volume in L (Number)
5.5.2.7.5.2 ADD SAMPLE DT - Properties
Dialog window: Method ▶ ADD SAMPLE DT ▶ Properties... ▶ ADD SAMPLE DT -
'Command name'
Command name
Name of the command.
Entry 25 characters
Addition increments
Number
Number of variable volume increments that are to be added.
This parameter can also be altered live after the first time the command
has been executed.
Input range 1 - 25
Default value 1
Addition volume #
Size of the individual volume of sample that is to be dosed in. The number
of addition volumes is defined by the amount defined in Number.