Metrohm viva 1.0 Manual - Manual (Page 121)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Workplace
viva 1.0
￭￭￭￭￭￭￭￭ 109
Interrupt run
The button is active (dark gray) in the status BUSY (determination is run-
ning). The button is disabled (light gray) in all other cases. When [Hold] is
pressed, this button will be replaced in the display by [Cont].
However, [Hold] does not allow you to stop all partial steps of the CVS
command.
Continue run
The button is only present in the status HOLD (determination interrupted).
When [Hold] is pressed, this button will be replaced in the display by
[Cont].
3.6.3.3 Single determination - Status display
Tab: Workplace ▶ Run ▶ Single determination
The current status of the workplace will be displayed on the Single
determination tab:
Status
Selection READY | BUSY | HOLD | ERROR
READY
Ready for the start of a determination.
BUSY
Determination running.
HOLD
Determination interrupted.
ERROR
Error.
3.6.3.4 Single determination - Determination parameters
Subwindow: Workplace ▶ Run ▶ Single determination
User
If the option Enforce login with user name is activated in the security
settings, then the short name of the currently logged-in user will be dis-