Metrohm viva 1.0 Manual - Manual (Page 399)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0
￭￭￭￭￭￭￭￭ 387
NOTE
Disabling this option may be advisable in cases where the sample data
variables are still invalid at the start of the method and are only defined
with a REQUEST command in the run.
Comment
Freely selectable comment on the sample data variables.
Entry 1,000 characters
Variable monitoring
NOTE
Is only displayed for sample data variables of the Number or Date/
Time type.
on | off (Default value: off)
If this check box is activated, then the limit values for the variable will be
monitored throughout the entire determination.
Lower limit
Lower limit for the variable.
Type = Number
Entry
10 digits
Type = Date/Time
Selection
'Date'
Upper limit
Upper limit for the variable.
Type = Number
Entry
10 digits
Type = Date/Time
Selection
'Date'