Metrohm viva 1.0 Manual - Manual (Page 402)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
390 ￭￭￭￭￭￭￭￭
viva 1.0
Live display
on | off (Default value: on)
If this check box is activated, then the track will be displayed in the live
display.
Return immediately
on | off (Default value: off)
If this check box is activated, then the program does not wait for this track
to be completed, but rather this track responds immediately to the track
with the call command. From now on, both tracks will be running simulta-
neously.
Delete old data
on | off (Default value: off)
If this check box is activated, then the data previously generated by this
track will be deleted each time this track is started.
Command variables
The following command variables are generated by the TRACK command
in the method run and can be used in formulas under the designation
'Command name.Variable identification':
Identifi-
cation Description
BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command has
never been started
FIN Command status; 1 = Command has ended at least
once, 0, invalid (variable not available) = Command
has never ended
5.5.2.2.4 VA TRACK
Dialog window: Method ▶ TRACK ▶ Properties... ▶ VA TRACK - 'Command name'
Start command for VA track.
Appearance
The command has the following appearance: