Metrohm viva 1.0 Manual - Manual (Page 646)

6.2 Administration
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
634 ￭￭￭￭￭￭￭￭
viva 1.0
Maximum number of login attempts
on | off (Default value: off)
If this check box is activated, then a user will be set to the disabled sta-
tus as soon as the number of login attempts defined here has been
exceeded. A user with the status disabled can no longer start the pro-
gram. The counter for login attempts is reset to zero for all users with
each restart.
Input range 2 - 5
Default value 3
Message by e-mail
on | off (Default value: off)
If this check box is activated, then an e-mail will be sent to the address
defined under [E-mail...] as soon as the defined number of login
attempts has been exceeded.
[E-mail...]
This button opens the Send e-mail window (see Chapter 6.2.2.3, page
636) for defining the e-mail parameters.
Logout policies
New login only for same user
on | off (Default value: off)
If this check box is activated, then only the same user can log in again
after a manual logout. Users with administrator rights can always log in. If
this option is enabled, then the following option is automatically enabled
and inactive.
NOTE
If the automatic logout is enabled (see below), then only the same user
or a user with administrator rights can log on again, no matter what
the setting for this option is.
No editing of workplaces in 'BUSY' status
on | off (Default value: off)
If this check box is activated then, after a user has logged out manually,
a newly logged-in user can neither edit data nor trigger actions on the
workplaces still open with running determinations. These workplaces will
only be available again when all determinations are finished. The old user
name still applies for the ongoing determinations. Exceptions are the can-