Metrohm viva 1.0 Manual - Manual (Page 805)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
7 Devices
viva 1.0
￭￭￭￭￭￭￭￭ 793
Selection Record message | Display message | Cancel
determination
Default value Display message
Record message
The message that the validity period has expired will be automatically
saved with the determination.
Display message
A message is displayed and you can select whether you want to con-
tinue the run or cancel it. If the run is continued then the message that
the validity period has expired will be automatically saved with the
determination.
Cancel determination
The determination is not started. The following message must be con-
firmed with [OK].
7.9.6 Establishing a connection with the barcode reader
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'De-
vice type' - 'Device name' ▶ Settings ▶ [Connect] ▶ Establish connection
In order to test the connection with a barcode reader, click on the [Con-
nect] button on the Settings tab.
If a barcode is then scanned with the barcode reader, the data received
will be entered in the following fields:
Barcode reader ID
Identification of the barcode reader.
Data
Read-in data.