Metrohm viva 1.0 Manual - Manual (Page 542)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
530 ￭￭￭￭￭￭￭￭
viva 1.0
Selection 'Command name' | 'first command'
Default value 'first command'
Event message
Selection of the event message that is to be sent. The following event
messages can be selected, depending on the recipient:
System
Selection
Quit | Hold | Stop
Default value Quit
Command
Selection
Quit | Hold | Continue
Default value Quit
Receiver Selection Event
message
Meaning
System - Hold Stop determination (all tracks). This corresponds
to the [Hold] button in the Run dialog win-
dow in the Workplace program part.
System - Quit Stop determination (series continues running).
System - Stop Stop determination and series. This corresponds
to the [Stop] button in the Run dialog window
in the Workplace program part.
Command All track com-
mands
Hold Interrupt selected track.
Command All track com-
mands
Continue Continue selected track.
Command All track com-
mands
Quit Cancel selected track.
Command All commands Hold Interrupt selected command.
Command All commands Continue Continue selected command.
Command All commands Quit Cancel selected command.
NOTE
In order for the event message sent by the SEND command to be able
to be edited by a RECEIVE command, this command must be running
and at the same time be in the position of being able to edit the sent
message.