3 properties - rs-232, Properties - rs-232, Rs-232 – Metrohm viva 1.0 Manual User Manual
Page 796
7.8 RS-232 device
■■■■■■■■■■■■■■■■■■■■■■
784
■■■■■■■■
viva 1.0
Device serial number
Shows the serial number of the device.
FPGA version
Shows the FPGA version of the device.
Set to work
Shows the date on which the device was automatically added to the
device table.
Remarks
Remarks about the device.
Entry
1,000 characters
Default value
'empty'
7.8.3
Properties - RS-232
Tab: Configuration
▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name'
▶ RS-232
The properties of the RS-232 interface are defined on this tab.
COM Port
Selection of the serial interface on the PC to which the device is connec-
ted.
Selection
COM1 | COM2 | … | COMn
Default value
COMn
COMn
First free COM port.
Baud rate
Transfer rate. The baud rate selected here must also be set on the device
itself.
Selection
300 | 600 | 1,200 | 2,400 | 4,800 | 9,600 |
19,200 | 38,400 | 57,600 | 115,200
Default value
9,600
Data bit
Number of data bits.
Selection
7 | 8
Default value
8
Parity
Type of parity testing.