Metrohm viva 1.0 Manual User Manual
Page 589
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0
￭￭￭￭￭￭￭￭
577
Standardized height
Number of decimal places for the standardized peak height.
Only for the DT calibration method! This result is not calculated if the
measuring command is called by a CALL COND!
Input range
0 - 6
Default value
3
Total volume
Number of decimal places and prefix selection for the current total volume
in the measuring vessel (L).
Input range
0 - 6
Default value
3
Selection
# | m | µ | n | p
Default value
#
Zero-order coefficient
Number of decimal places for the zero-order coefficient of the calibration
curve or standard addition curve.
Input range
0 - 6
Default value
3
First-order coefficient
Number of decimal places for the first-order coefficient of the calibration
curve or standard addition curve.
Input range
0 - 6
Default value
3
Second-order coefficient
Number of decimal places for the second-order coefficient of the calibra-
tion curve or standard addition curve.
Input range
0 - 6
Default value
3
Fourth-order coefficient
Number of decimal places for the fourth-order coefficient of the calibra-
tion curve or standard addition curve.
Input range
0 - 6
Default value
3
Coefficient of determination
Number of decimal places for the coefficient of determination.