Metrohm viva 1.0 Manual - Manual (Page 528)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
516 ￭￭￭￭￭￭￭￭
viva 1.0
5.5.2.8.7 RACK
5.5.2.8.7.1 RACK - Overview
Dialog window: Method ▶ RACK ▶ Properties... ▶ RACK - 'Command name'
Command for the initialization of the sample rack in place. The rack
that is in place, the lift and the robotic arm (if present) are reset, the rack
code is read out and the respective rack data is transferred to the sample
changer.
Instruments
This command can be executed with the following instruments:
Sample changer: 814, 815, 858, 919
Appearance
The command has the following appearance:
Parameters
The parameters for the RACK command are configured in the following
dialog window:
￭ RACK - Properties
Command variables
The following command variables are generated by the RACK command
in the method run and can be used in formulas under the designation
'Command name.Variable identification':
Identification Description
BSY Command status; 1 = BUSY, HOLD or ERROR; 0 =
READY; invalid (variable not available) = Command
has never been started
FIN Command status; 1 = Command has ended at
least once, 0, invalid (variable not available) =
Command has never ended
5.5.2.8.7.2 RACK - Properties
Dialog window: Method ▶ RACK ▶ Properties... ▶ RACK - 'Command name'
Command name
Name of the command.
Entry 25 characters