Metrohm viva 1.0 Manual - Manual (Page 660)

6.3 Configuration data
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
648 ￭￭￭￭￭￭￭￭
viva 1.0
6.3.2 Back up/restore
6.3.2.1 Backing up configuration data automatically
Dialog window: Configuration ▶ File ▶ Backup ▶ Automatically ▶ Backup configu-
ration data automatically
Automatic backup
on | off (Default value: off)
If this check box is activated, then the configuration database is saved
automatically to the defined backup directory at the desired time interval.
The entire configuration database (including method groups and meth-
ods) is saved at this time.
If this check box is deactivated, then the following parameters cannot be
edited.
Last backup
Shows date and time of the last configuration data backup.
Next backup
Date and time at which the next backup is to be carried out. opens
the Next backup window to select the date (see Chapter 2.4.1, page
67).
Default value Last backup + 1 month
Interval
Entry of the time interval after which an automatic backup will take place.
With each automatic or manual backup, the interval entered here will be
added to the date of Last backup and entered in the Next backup
field.
Input range 1 - 999
Default value 1
Selection day(s) | week(s) | month | year(s)
Default value month
Backup directory
Selection of a predefined backup directory (see Chapter 6.2.3.2.1, page
639).
NOTE
Make sure that you have read and write permission for the selected
directory.