Metrohm viva 1.0 Manual - Manual (Page 170)

3.9 Curves subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
158 ￭￭￭￭￭￭￭￭
viva 1.0
Rep
Replication number.
Display
on | off (Default value: on)
Indicates whether a measurement curve is displayed in the curve window
or not.
Context-sensitive menu items for table
The table cannot be edited directly but only via the following context-sen-
sitive menu items:
On The check box in the Display column for the selected measurement curve is
activated.
Off The check box in the Display column for the selected measurement curve is
deactivated.
All on All check boxes in the Display column are activated.
All off All check boxes in the Display column are deactivated.
Invert selection The settings in the Display column for the selected measurement curves are
inverted.
Buttons
Save
The settings concerning the displays of individual curves and the height
ratio between curve window and table are saved with this button.
Selection on
The marking of the curves selected in the table is activated with this but-
ton.
Selection off
The marking of the curves selected in the table is deactivated with this
button.
3.9.1.2.3 Calibration curve
Subwindow: Workplace ▶ Curves #
Calibration curve display
The following elements are displayed in the upper left-hand part of the
curve window:
￭ Axes with labeling (measured quantity and unit)
￭ Calibration points of the standard addition