Metrohm viva 1.0 Manual - Manual (Page 574)

5.6 Evaluation subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
562 ￭￭￭￭￭￭￭￭
viva 1.0
5.6.4 Evaluation - Standards
5.6.4.1 Standards - General
Subwindow section: Method ▶ Evaluation ▶ Standards
Application
The standard solutions for the calibration are defined in the Evaluation -
Standards section of the evaluation. The term "Standards" designates all
calibration solutions and spiking solutions for calibration methods. The
solutions defined here are defined globally for the entire method; they are
not specific to a command.
Tabs
￭ Standards
5.6.4.2 Standards - Standards
Subwindow section: Method ▶ Evaluation ▶ Standards ▶ Standards
Table
The table of standard solutions contains the standards defined for the
method with the corresponding concentrations for the substances. If a
substance is defined in more than one command, it is only listed once.
The table cannot be edited and contains the following columns:
Substance
Name of the substance.
'Standard name'
Name of the standard.
Modifies the sequence of shown substances by moving the selected line
upward.
Modifies the sequence of shown substances by moving the selected line
downward.
Edit menu
New... Selects the empty column marked with the asterisk and opens the Standard
dialog window (see Chapter 5.6.4.3, page 563).
Apply from ADD STD Applies standards from the ADD STD commands.