Metrohm viva 1.0 Manual - Manual (Page 346)

4.7 Subwindow Information
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
334 ￭￭￭￭￭￭￭￭
viva 1.0
Analytical volume:
Volume portion (aliquot) of the diluted sample's dilution volume that was
used for the determination.
Dilution volume:
Maximum filling volume used for dilution of the sample.
Entry date:
Date and time at which the sample amount was entered.
Data source:
Data source for the sample amount. In the case of a manual entry, man-
ual is displayed.
Identifications
Information about the sample identifications.
ID1 to ID16:
Shows the sample identifications entered for the sample. The identifica-
tions will only be shown when a value is present.
NOTE
If a different name has been defined for the method variables assigned
to the sample data variables ID1 - ID16, Sample amount, Unit,
Sample position in the START command, then the title shown here
will consist of this name and additionally the standard name in brackets
(e.g. Batch (ID2)).
4.7.5 Information - Configuration
Tab: Database ▶ Information ▶ Configuration
Shows general information on the devices, sensors and variables used.
Device 'Device name'
Information about the device used (only the existing device information
will be shown).
Device type:
Type of device.
Program version:
Device program version.