Metrohm viva 1.0 Manual - Manual (Page 506)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
494 ￭￭￭￭￭￭￭￭
viva 1.0
Selection 846 Dosing Interface | 814 USB Sample Pro-
cessor | 815 Robotic USB Sample Processor
XL | 858.0010 Professional Sample Processor |
858.0020 Professional Sample Processor |
858.0030 Professional Sample Processor |
919.0020 IC Autosampler plus | 894 Profes-
sional CVS | 089 Photometer
Default value 894 Professional CVS
Dosing device
Dosing device
Selection of the dosing device to be prepared. All the dosing device con-
nections which are possible with the selected device type are always dis-
played.
846, 894
Selection
1 | 2 | 3 | 4
Default value 1
814, 815, 858, 919
Selection
1 | 2 | 3
Default value 1
089
Selection
1
Name of dosing unit
Selection of a dosing unit from the dosing units available in the table of
the dosing units.
Selection 'Name of the dosing unit' | not defined
Default value not defined
'Name of the dosing unit'
Alphabetically organized selection of the names of the dosing units
from the table of dosing units in the configuration. A check is made
prior to the start of a method to determine whether the selected dos-
ing unit is identical with the name of the dosing unit at the selected
MSB connector.
not defined
No check is made prior to the start of a method to determine whether
the selected dosing unit is identical with the name of the dosing unit at
the selected MSB connector. This has the advantage that a method can
be utilized by users who use other dosing units.