Metrohm viva 1.0 Manual - Manual (Page 578)

5.6 Evaluation subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
566 ￭￭￭￭￭￭￭￭
viva 1.0
Weighting
Information as to how the points of the calibration curve are to be weigh-
ted.
Curve type
Curve type for the evaluation of the calibration curve.
Calibration method DT
Substance
Name of the substance. Substances can neither be added nor deleted
here, this must take place in the substance table (see Chapter 5.6.3, page
555).
Evaluation quantity
Measured quantity for the evaluation of the calibration curve.
Weighting
Information as to how the points of the calibration curve are to be weigh-
ted.
Evaluation ratio
Evaluation ratio Q/Q(0) with which the calibration factor is calculated.
Curve type for standard
Curve type for the evaluation of the calibration curve.
Begin of evaluation standard
Evaluation ratio Q/Q(0) with which the calculation of the regression for
the standards is to be started.
Curve type for sample
Curve type for the evaluation of the calibration curve.
Begin of evaluation sample
Evaluation ratio Q/Q(0) with which the calculation of the regression for
the samples is to be started.
Edit menu
Properties... Opens the Properties calibration dialog window in order to edit the data of
the highlighted line.
Apply settings for all
substances
The settings of the highlighted line are adopted for all substances.