Metrohm viva 1.0 Manual - Manual (Page 369)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.0
￭￭￭￭￭￭￭￭ 357
￭ Miscellaneous
REQUEST
LOOP
WAIT
SEQUENCE
The new command is inserted above the selected command after confirm-
ing the selection with [OK].
5.2.4.2.2 Selecting a command
Subwindow: Method
A command is selected with a left mouse click. The selected command is
enframed by a double-width line. Further commands within the same
track can be added to or removed from the selection with the left mouse
button while the Ctrl key is held down.
Non-selected command Selected command
5.2.4.2.3 Moving a command
Subwindow: Method
Moving commands with drag and drop
To move commands with drag and drop they have to be selected first.
They can then be moved to the desired position between two commands
with the left mouse button held down. A red arrow indicates the possible
positions.
Moving commands via the clipboard
To move commands via the clipboard they have to be cut first. You can
then select a command in an existing track and insert the commands from
the clipboard above this command.
5.2.4.2.4 Copying a command
Subwindow: Method
Copying commands with drag and drop
To copy commands with drag and drop they have to be selected first.
They can then be copied to the desired position with the left mouse but-
ton and the Ctrl key simultaneously pressed. A red arrow indicates the
possible positions.