Metrohm viva 1.0 Manual - Manual (Page 590)

5.6 Evaluation subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
578 ￭￭￭￭￭￭￭￭
viva 1.0
Input range 0 - 6
Default value 5
Substance concentration in measuring vessel
Number of decimal places for the concentration of the substance in the
measuring vessel. The unit corresponds to the substance concentration of
the added standard solution (g/L; mol/L or L/L)
Input range 0 - 6
Default value 2
Selection # | m | µ | n | p
Default value #
RSD of the substance concentration in measuring vessel
Number of decimal places for the standard deviation of the substance
concentration in the measuring vessel (%).
Input range 0 - 6
Default value 1
Amount of substance
Number of decimal places for the mass, amount of substance or volume
of a substance in the measuring vessel. The unit corresponds to the unit of
the counter of the substance concentration of the added standard solu-
tion (g; mol or L)
Input range 0 - 6
Default value 2
Selection # | m | µ | n | p
Default value #
RSD of the substance concentration in the sample
Number of decimal places for the relative standard deviation of the sub-
stance concentration in the sample (%).
Input range 0 - 6
Default value 1
Effective addition volume of the standard solution for the evaluation ratio
Number of decimal places for the effective addition volume of the added
standard solution for the evaluation ratio (L).
This result exists solely for the calibration method = DT and the sample
type = Standard.
Input range 0 - 6
Default value 2
Selection # | m | µ | n | p
Default value #