Metrohm viva 1.0 Manual - Manual (Page 562)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
550 ￭￭￭￭￭￭￭￭
viva 1.0
Selection Stop track and waiting for [Continue] | Stop
all tracks and waiting for [Continue] | Waiting
time
Default value Stop track and waiting for [Continue]
Stop track and waiting for [Continue]
If this option is selected, then the track in which the WAIT command
is located is stopped and a message is displayed. The method run can
be continued only by pressing [Continue].
Stop all tracks and waiting for [Continue]
If this option is selected, then all active tracks are stopped and a mes-
sage is displayed. The method run can be continued only by pressing
[Continue].
Waiting time
If this option is selected, then the method run will be continued auto-
matically after the waiting time expires. The message text defined
under Message appears during the waiting time.
Waiting time
This parameter can be edited only if Wait = Waiting time.
Input range 0 - 9,999.9
Default value 0
Selection s | min
Default value s
Message
The message defined here is displayed with tracks stopped or during the
waiting time. The text editor for entering or changing the message is
opened with or by double-clicking on the text field (see Chapter
2.4.2, page 68). The formula editor can also be opened within the text
field (see Chapter 2.3, page 13).
Entry Text (unlimited)
Record message
on | off (Default value: off)
If this check box is activated, then the message defined in the text field
will be documented in the determination.
Message by e-mail
on | off (Default value: off)
If this check box is activated, then the message defined in the text field
will be sent to the address defined under [E-mail...].