AMETEK XG Family Programmable DC - Manual (Page 171)

Remote Operation
M370430-01 Rev E 5-39
5
OPERation Status Register
The operation status register is a standard SCPI, 16-bit register which
contains information about conditions which are part of the power
supply's normal operation. The Operation Status data structure has the
operation status register and two sub-registers to represent shutdown
and protection shutdown. Each of the sub-registers is summarized in a
summary bit.
Figure 5-22 represents the Operation Status data structure. The “+”
represents the logical summation/or of bits in a register. Table 5-12,
Table 5-13, and Table 5-14 describe the meanings of each bit as well as
the bit number and bit weight.
Figure 5-22 Operation Status Register Fanout
STATus:OPERation:SHUTdown:PROTection
STATus:OPERation:SHUTdown
STATus:OPE Ration
STATus:OPE Ration :CSH are
Over VOLTage
Under VOLTage
Over CURRent
Not Used
AC Off
Over TEM Perature
Not Used
Foldback
Fan Failure
Not Used
Not U sed
Not U sed
Not U sed
Not Used
Not Used
Not Used
MASTer SLAve
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
CALibrating
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
SHUTdown Summary
Local Lock
Current Share Summary
Constant Voltage Mode
Constant Current Mode
PROGram Running
Not Used
Never Used
Never Used
Never Used
Never Used
PROTection Summary
INTerlock
Not Used
External Shutdown
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
To Status
Byte Bit 7