AMETEK XG Family Programmable DC - Manual (Page 291)

Calibration and Troubleshooting
M370430-01 Rev E 7-27
7
Troubleshooting for Operators
Refer to Table 7-1 to ensure that the power supply is configured and
connected for normal operation. If you require any further
troubleshooting assistance, call your service technician. See “Contact
Information” on page i.
Table 7-1 Troubleshooting
Symptom Check Further Checks and Corrections
The power supply is not
operating.
is
displayed.
Flash memory check sum error. Do a reset. See page 3-42.
Important: The power supply will boot with default options and calibration
values.