Super Systems SuperDATA - Manual (Page 50)

Super Systems Inc Page 50 of 172 Super Data Operations Manual
This screen will vary depending on the connection, instrument type and instrument options selected. For full
information on configuring instruments, see the section on SDIO Configuration in this help file. Clicking on the
"Apply" button will check the configuration and update the configuration line. Fields displayed in RED are invalid and
must be corrected in order to save with ent "OK" button. Fields displayed in YELLOW are acceptable but not normal
and should be verified.
ComRBridge
ComRBridge is used to bridge remote comm data from one comm server (SDIO) to another SDIO running on a
different computer. ComRBridge is setup using the ComRBridge.cfg file - this will normally be done by SSi
Engineering or Field Service personnel.