Super Systems SuperDATA - Manual (Page 72)

Super Systems Inc Page 72 of 172 Super Data Operations Manual
Bring to Front: Lays the selected object on top of any overlapping objects.
Send to Back: Drops the selected object behind any overlapping objects.
Scale RTM Screen:
Scales an already created screen so that it will fit the target resolution
selected. The user may opt to enter a scale factor manually or specify
a target resolution. Entering a manual scale factor will cause the
screen and all the objects on the screen to change to match the factor.
For example, entering a 2 will double the size of all objects. The
effects of selecting a target resolution vary depending on the resolution
of the screen RealEdit is running on. Scaling to a lower resolution will
naturally cause the screen’s size to shrink in the current editor. Scaling
to the same resolution will leave the screen unchanged and scaling to
higher resolution will enlarge the screen.
Because fonts are often botched by re-scaling, it is an option to exclude changing them on the newly sized screen.
Verify RTM Items and Resources: Checks for offending or undefined data in a screen.
View
Tool Bar : Simply allows the user to hide the top toolbar.
Data Values: Displays a table of the current Data Values related to the RealTime Screen being edited.
Options
Generic Comm Channel Info: This selection allows the user to select any of the 128 possible logical channels when
making a Comm Channel Definition.
Installed Comm Channel Info: This selection lists the actual Installed Channels by tag name and fills (not used) into
the unused channels.
Screen Item Locking: The user cannot move or resize screen items. By default, Realedit opens any existing screen
with the screen items locked.
Alignment to Grid: Controls the granularity of screen object movement and sizing.
Live Data: If this item is selected, data from the current SDIO integer file is shown on the screen being edited.
Live Objects: If this item is selected, data dependent object properties will be modified by the dependent data values
in the current SDIO integer file.
Settings: Displays the following dialog box: