Canon imagePROGRAF TX-3100 36" Printer with Basket - Manual (Page 130)

Keeping Track of the Amount of Roll Paper Left
There are two methods of managing the amount of roll paper left: by using the barcode and by estimating
the amount of roll paper left.
Managing by the Barcode for the Amount of Roll Paper Left
When you set Manage remaining roll amount to Barcodes in Printer settings on the Home screen, the
amount of remaining roll paper and the media type information are printed as a barcode and text when the
paper is removed. When
Manage remaining roll amount is set to Barcodes and you load roll paper with
a printed barcode, the media type and remaining amount are automatically detected after the roll paper is
loaded. The barcode will be cut off after it has been read.
Important
• If the barcode on the roll paper is not detected, enter the media type and length on the touch screen. •
The length of the paper at this time can be set in Roll length (change default) .
Setting the Length of the Roll Paper when Managing by the Barcode
Follow the steps below when setting Manage remaining roll amount to Barcodes .
1. Tap Printer settings on Home screen of touch screen. 1.
Note
• If the Home screen does not appear, tap the HOME button. •
2. Tap Paper-related settings . 2.
3. Tap Manage remaining roll amount . 3.
4. Tap Barcodes . 4.
5. Check the length of the roll paper. 5.
130