Smoothing, Smoothing examples – Canon imagePROGRAF TX-3100 36" Printer with Basket User Manual
Page 314
Advertising
Smoothing
Makes arc drawing smoother.
This setting item is displayed by tapping in the following order.
Printer settings
>
Print settings
>
HP-GL/2 print settings
>
Line & pen manager
•
Software (Initial setting)
•
Draws arcs using HP-GL/2 data settings.
Default value of the central angle of an arc in HP-GL/2 is 5° (Regular 72-sided polygon) if the angle is
not specified using a HP-GL/2 command.
•
Smoothing
•
Draws curves that are smoother than arcs with a central angle of 1°.
SMOOTHING EXAMPLES
• When
Software
is selected:
•
• When
Smoothing
is selected:
•
314
Advertising