Canon imagePROGRAF TX-3100 36" Printer with Basket User Manual

Page 428

Advertising
background image

Automatic Adjustment to Straighten Lines and Colors

If printed vertical lines are warped or colors are out of alignment, execute

Print Head Alignment

and adjust

the print head position.

Choose from

Auto (standard)

or

Auto (advanced)

for automatically adjusting the print head.

Minor warping and misaligned colors can usually be improved by executing

Auto (standard)

. If there is no

improvement, perform

Auto (advanced)

or

Manual

.

Manual Adjustment to Straighten Lines and Colors

When you execute

Auto (standard)

or

Auto (advanced)

, the adjustment pattern is printed, and the print

head position is adjusted based on the printing result automatically.

Important

• If the situation is difficult, such as the lines being misaligned, or color unevenness does not improve

even after executing

Print Head Alignment

, execute

Print head angle adjustment

and then execute

Print Head Alignment

again.

Adjusting Line Misalignment

• Because the results of adjustment vary depending on the type of paper used for adjustment, use the

same type of paper as you will use for printing.

• This function is not available with Tracing Paper, Translucent Matte Film, or Clear Film.

Note

• After print head replacement, we recommend executing

Print Head Alignment

. When

Print pattern

after new head

is set to

ON

, print head position adjustment is automatically executed after print head

replacement.

• To change the paper type or for more beautiful color borders, perform

Auto (standard)

.

• To ensure clear quality and when replacing the print head, perform

Auto (advanced)

to fine-tune the

position between nozzles and colors. To ensure high-quality printing, we recommend that you execute

Auto (advanced)

.

• If adjustment is not possible as expected using special paper, try another type of paper or try

Manual

adjustment.

Manual Adjustment to Straighten Lines and Colors

Paper to Prepare

When using rolls

An unused roll at least 10.00 in. (254.0 mm) wide

When using sheets

Auto (standard)

: Three sheets of unused paper, A4/Letter size or larger (or one sheet when using A2

or larger)

428

Advertising