Canon imagePROGRAF TX-3100 36" Printer with Basket - Manual (Page 731)

Saving Print Jobs Sent from Sources Other than Printer Driver
To save print jobs sent from software or systems other than the printer driver or applications provided with
the printer, specify the output method and select the setting to perform printing after saving printing data
using the operation panel.
Note
• Contact the software or system developer for information about support for this printer function.
Important
• The administrator password is required to change settings if it is enabled for changing settings using the
operation panel.
Specifying Output Method
Printing after Saving Printing Data
Specifying Output Method
Perform settings for printing or saving print job.
1. Flick HOME screen and tap Printer settings . 1.
Home Screen Menu Composition
2. Tap Hard disk settings . 2.
3. Enter administrator password if it is enabled. 3.
4. Tap Output method . 4.
5. Tap the output method you want to set up. 5.
Print
Save print jobs automatically at the same time they are printed. (This is the default format.)
Print (auto delete)
Save print jobs temporarily at the same time they are printed and delete them after printing.
Save to job box
Save print jobs on in the personal job box.
Printing after Saving Printing Data
To save print jobs on the hard disk before printing, select ON for Save first and print .
Printing will start when Save first and print is set to ON , even if you have selected Save to job box for
Output method .
731