Canon imagePROGRAF TX-3100 36" Printer with Basket - Manual (Page 771)

Paper is not cut
Check 1 Is Automatic Cutting in the printer driver set to No or Print Cut Guideline ?
Set the printer driver Automatic Cutting setting to Yes .
Page Setup Tab Description (Windows)
Paper Detailed Settings (macOS)
Check 2 Is Cutting mode in the touch screen menu set to Eject cut or User cut ?
If Cutting mode is set to Eject cut , select Feed/cut in the touch screen menu and cut the paper.
If Cutting mode is set to User cut , cut the roll paper with a cutting implement such as scissors.
Specifying the Cutting Method for Rolls
Check 3 Is the cutter blade attached?
Attach the cutter blade.
Replacing the Cutter Blade
Check 4 Is the cutting method for paper ejected after printing set to Do not cut when
the roll unit is set to Take-up mode ?
Follow the steps below to change the settings.
1. Select the roll unit on the touch screen. 1.
2. Select Use in take-up mode , and then select Use the cutting mode setting . 2.
3. Set the Cutting mode for Roll paper 1 on the touch screen to Automatic cut . 3.
771