Paper is not cut straight – Canon imagePROGRAF TX-3100 36" Printer with Basket User Manual
Page 769
Paper is not cut straight
Check 1
Is the edge of the paper cutting position creased?
Straighten out any curling by the edges of the paper.
Check 2
Is the edge of the paper cutting position lifting up when cutting?
Reload the paper correctly.
Check 3
Is the paper a type that can be cut with the cutter blade?
Set
Cutting mode
in the touch screen menu to
User cut
, then and cut the roll paper with a cutting implement
such as scissors.
Specifying the Cutting Method for Rolls
Check 4
Are you using the basket properly?
Make sure that you are using the basket properly.
Check 5
Are you using the stacker properly?
Make sure that you are using the stacker properly.
Check 6
Check that the
Cut speed
setting is correct.
Tap paper settings display area on Home screen of touch screen, tap the feed slot where the paper to change is
set, then tap
Paper settings
>
Advanced
and, change the setting value of
Cut speed
.
If the paper edge cannot be cut straight at the cut starting position, it may be improved by selecting slower cut
speed than that selected currently.
If the paper edge cannot be cut straight at the cut ending position, it may be improved by selecting faster cut
speed than that selected currently.
Check 7
Did the printing material slip diagonally while being cut?
Set the
Cutting mode
in the touch screen menu to
Eject cut
, and then hold and cut the material after it has
printed.
Specifying the Cutting Method for Rolls
Check 8
Is the cutter blade attached properly?
Attach the cutter blade properly.
769