ZOLL R Series Monitor Defibrillator Rev J - Manual (Page 200)

C HAPTER 2 P RODUCT O VERVIEW
2–4 www.zoll.com 9650-0904-01 Rev. K
Table 2-2 describes the controls and indicators that appear on the front panel.
Figure 2-2. R Series Front Panel (Manual Mode)
Table 2-2. R Series Controls and Indicators
Control or Indicator Description
Display screen Shows therapeutic settings, physiological waveforms, and other
information for each monitored parameter, messages, time, and softkey
labels.
Battery indicator Indicates battery status:
Steady yellow: Battery is charging.
Steady green: Battery is charged.
Alternating yellow and green: No battery is installed, or there is a
battery charging fault.
Indicator for AC power Illuminated when the unit is plugged into an alternating current (AC)
power source.
Code Readiness
indicator Shows the status of the unit, based on its most recent Readiness check:
• A green “

“ indicates the unit is ready for therapeutic use.
• A red “X” indicates the unit’s Readiness is compromised and that it
may not be ready for therapeutic use.
Mode Selector Selects the mode of operation (available options depend on model):
• OFF — Unit is powered off.
• ON — Unit is automatically powered on in AED mode.
• PACER — Unit is in pacer mode (pacer door drops open).
ENERGY SELECT
Buttons Display in Manual mode only. Two sets of up-down arrow buttons
control the selection of defibrillator energy, one set located on the front
panel and the other located on the sternum paddle.
OUTPUT
mA
OUTPUT
mA
RATE
ppm
RATE
ppm
4:1
ENERGY
SELECT
ENERGY
SELECT
ANALYZE ANALYZE CHARGE CHARGE
LEAD
SIZE
ALARM
SUSPEND
RECORDER
OFF
ON
PACER
Display screen
Six softkeys
Mode Selector
AC power
indicator
Battery
indicator
Code
Readiness
indicator
Pacer door is open
NIBP Button
(optional)