ZOLL R Series Monitor Defibrillator Rev J - Manual (Page 395)

Defibrillator Controls and Indicators
9650-0912-01 Rev. K ZOLL R Series Operator’s Guide 2–3
The Front Panel
The front panel of the R Series device includes the display screen, softkeys, battery indicator,
AC power indicator, Code Readiness indicator, SHOCK button, and control panel. The control
panel configuration varies slightly depending on the model. See Figure 2-1.
Figure 2-1. R Series Front Panel
Table 2-2 describes the controls and indicators that appear on the front panel.
Table 2-2. R Series Controls and Indicators
Control or Indicator Description
Display screen Shows therapeutic settings, physiological waveforms, and other
information for each monitored parameter, messages, time, and softkey
labels.
Battery indicator Indicates battery status:
Steady yellow: Battery is charging.
Steady green: Battery is charged.
Alternating yellow and green: No battery is installed, or there is a
battery charging fault.
Indicator for AC power Illuminated when the unit is plugged into an alternating current (AC)
power source.
Code Readiness
indicator Shows the status of the unit, based on its most recent Readiness check:
• A green “

“ indicates the unit is ready for therapeutic use.
• A red “X” indicates the unit’s Readiness is compromised an that it
may not be ready for therapeutic use.
3
1
SHOCK SHOCK
2
ENERGY
SELECT
ENERGY
SELECT
ANALYZE ANALYZE CHARGE CHARGE
OUTPUT
mA
OUTPUT
mA
RATE
ppm
RATE
ppm
4:1
LEAD
SIZE
ALARM
SUSPEND
RECORDER
DEFIB
OFF
MONITOR
PACER
Display screen
Six softkeys
Mode Selector
AC power
indicator
Battery
indicator
Code
Readiness
indicator
NIBP Button
(optional)