ZOLL R Series Monitor Defibrillator Rev J - Manual (Page 490)

C HAPTER 12 M AINTENANCE
12–8 www.zoll.com 9650-0912-01 Rev. K
Setting Time and Date
To set the unit’s time and date:
1. Set the Mode Selector to MONITOR.
2. Press the Options softkey.
3. Press More.
4. Press Set Clock.
The month field will be highlighted.
Figure 12-4. Set Time Screen
5. Press the Inc Value or Dec Value softkeys to select the appropriate month.
6. Press the Next Field softkey to set the selected month, and move the highlight to the next
field (day).
7. Repeat steps 5 and 6 to set the correct day, year, hours, and minutes values.
Note: The last field does not automatically scroll (wrap) to the beginning. You must press the
Prev Field softkey to enter the values for the previous field. If you need to make
corrections, press the Prev Field softkey to move the highlight to the field previously
entered.
8. Press the Enter and Return softkey to set all values and return to normal monitoring mode.
Note: The R Series unit may be configured to synchronize the time automatically with a data
server in the Wi-Fi Data Transfer configuration settings. See the R Series
Configuration Guide for more information.
Cleaning the R Series Unit
R Series products and accessories are chemically resistant to most common cleaning solutions
and noncaustic detergents. The following cleaning solutions are approved:
• 90% isopropyl alcohol (except on adapters, patient cable and Wi-Fi Data COMM Card)
• Soap and water
• Chlorine bleach solution of 30 milliliters per liter of water (except on Sync In/Marker Out
connector, battery compartment pins and Wi-Fi cards)
ZOLL recommends cleaning the device, paddles, and cables with a soft damp cloth using the
approved cleaning agents. The external printer parts should be cleaned with a damp, soft cloth
only.
Set Time
Prev
Field
Enter
and
Return
14, 06 16 : 37
Inc
Value
Dec
Value
Next
Field
Oct