ZOLL R Series Monitor Defibrillator Rev J - Manual (Page 68)

R Series Service Manual
3-2 9650-0903-01 Rev. J
• Needlenose pliers
• Exacto knife
• Compressed air
• 1/2” Nut Driver
• 3M Scotch-Weld Hot Melt Adhesive 3779 TC Amber
Safety Precautions
Warning! SHOCK HAZARD!
Caution TAKE THE NECESSARY PRECAUTIONS TO GUARD AGAINST SHOCK OR INJURY BEFORE YOU CONDUCT
DEFIBRILLATOR TESTS OR REPAIRS.
• Only properly trained technicians should service the unit.
• The unit can contain deadly voltages even if the unit is turned off.
• Make sure to discharge the unit before working with it.
• Make sure you take the necessary precautions when working with static sensitive units. For example, you must wear a conductive wrist strap (which
touches your skin) connected to a grounding mat and to the earth ground. You must remove the wrist strap when you discharge high voltage or when
you are working on energized equipment.
• Wear gloves to prevent skin oils from affecting the equipment.