Removing the front panel assembly, Removing the front panel assembly -12 – ZOLL R Series Monitor Defibrillator Rev J User Manual
Page 78
Advertising
R Series Service Manual
3-12
9650-0903-01 Rev. J
Removing the Front Panel Assembly
1. Remove 3 Phillips screws from the top of the rear
Front Panel Assembly.
2. Remove the 3 hex screws from the bottom front of the
Front Panel Assembly.
Note:
During reassembly, torque to 6 in-lbs.
Note:
During reassembly, torque to 6 in-lbs.
Advertising