Rockwell Automation 5720 DriveLogix System - Manual (Page 120)

Publication 20D-UM002C-EN-P - November 2003
6-4 Communicating with Devices on an EtherNet/IP Link
3. Click on the arrow to the right of the Available Driver Types box. The
Available Driver Types list will appear.
4. Select Ethernet Devices and click on Add/New. You will be prompted to
name the driver.
5. Select the default driver name (e.g., AB_ETH-1) or type in your own name
and click on OK.
The Configure driver window will appear with the Station Mapping page
open.
6. Click on Add New.