Rockwell Automation 5720 DriveLogix System - Manual (Page 25)

Publication 20D-UM002C-EN-P - November 2003
Getting Started 1-13
Adding a local analog module (continued)
Configure
3
3. Identify the output module.
Click Next.
These screens are specific to the 1794-OB16 output module.
4. Use the Create wizard to configure the output module.
Click Finish.
You should enter a name.
Describe the module (optional).
Specify electronic keying.
Select the communication format.
Use default values for this example.
If you do not want to go through each screen in the Create wizard, click
Click Next.