Rockwell Automation 5720 DriveLogix System - Manual (Page 184)

Publication 20D-UM002C-EN-P - November 2003
8-4 Communicating with Devices on a DeviceNet Link
Step 3: Define the DeviceNet scanlist
Use RSNetWorx for DeviceNet to create a scanlist of the DeviceNet devices
connected to the 1788-DNBO card. If the DriveLogix controller is
powered-up while connected to the 1788-DNBO card, the controller project
does not have to be downloaded from RSLogix 5000 programming software
to the controller and the controller must be in Program or Remote Program
mode.
1. In RSNetWorx software, go online, enable edits, and survey the network.
2. Assign a node address to each device.
Configure each device.