Rockwell Automation 5720 DriveLogix System - Manual (Page 245)

1 Publication 20D-UM002C-EN-P - November 2003
Appendix
B
Installing and Maintaining the Battery
Using this Appendix
Connecting the Battery Allen-Bradley ships the DriveLogix controller with the battery installed, but
disconnected. You must connect the battary while installing the drive:
1. Referring to Access Procedures on page C-1, remove the cover(s) to
gain access to the DriveLogix controller.
2. Connect the plug on the battery lead into the socket on the DriveLogix
controller.
3. Referring to Access Procedures on page C-1, replace the cover(s)
For information about: See page
Installing and Maintaining the Battery B-1
Storing replacement batteries B-2
Estimating battery life B-2
Replacing batteries B-3