Adding a local input module1 – Rockwell Automation 5720 DriveLogix System User Manual
Page 20
Advertising
![background image](/manuals/577021/20/background.png)
Publication 20D-UM002C-EN-P - November 2003
1-8 Getting Started
Adding a local input module1
Configure
3
1.
Create a new module.
2.
Select an input module to add.
Select a catalog number.
Click OK.
continued
A.
Place the cursor over the local DIN rail (FlexBus Local).
B.
Click the right mouse button and select New Module.
Refer to Chater 4, "Placing and Configuring Local I/O"
for more detailed information.
Advertising
This manual is related to the following products: