Rockwell Automation 5720 DriveLogix System - Manual (Page 26)

Publication 20D-UM002C-EN-P - November 2003
1-14 Getting Started
Changing module properties
1. View properties for the module.
2. View the General tab.
The screen defaults to the General tab.
Verify that the module settings are
correct. Make changes if necessary.
A. Place the cursor over the 1794-IB16 module.
B. Click the right mouse button and select Properties.
Configure
3
Click OK.
The tabs that appear depend on the type of module.
Important: If you want to change the communication format of a module, you must