Rockwell Automation 5720 DriveLogix System - Manual (Page 125)

Publication 20D-UM002C-EN-P - November 2003
Communicating with Devices on an EtherNet/IP Link 6-9
Add FLEX I/O Modules to the I/O Configuration
After you select the appropriate FLEX I/O module, the Module Properties
window opens.
4. Configure the module.
5. Add additional modules as needed.
The local daughtercard becomes the “parent module” to the remote module.
The controller organizer shows this parent/child relationship between local
and remote communication devices.
1. In RSLogix 5000 programming software, select 1794-AENT Ethernet adapter.
2 Right-click to select New Module and add the appropriate FLEX I/O module.
3. Specify the appropriate module settings.