Rockwell Automation 5720 DriveLogix System - Manual (Page 98)

Publication 20D-UM002C-EN-P - November 2003
4-14 Placing and Configuring Local I/O
where:
This address variable: Is:
Location Identifies network location
LOCAL = local DIN rail or chassis
ADAPTER_NAME = identifies remote adapter or bridge
SlotNumber Slot number of I/O module in its chassis
Type Type of data
I = input
O = output
C = configuration
S = status
MemberName Specific data from the I/O module; depends on the type of
data the module can store
For example, Data and Fault are possible fields of data for an
I/O module. Data is the common name for values the are sent
to or received from I/O points.
SubMemberName Specific data related to a MemberName.
Bit (optional) Specific point on the I/O module; depends on the size of the
I/O module (0-31 for a 32-point module)