Rockwell Automation 5720 DriveLogix System - Manual (Page 21)

Publication 20D-UM002C-EN-P - November 2003
Getting Started 1-9
Adding a local input module (continued)
Configure
3
3. Identify the input module.
You should enter a name.
Describe the module (optional).
Specify electronic keying.
Select the communication format.
These screens are specific to the 1794-IB16 input module.
4. Use the Create wizard to configure the input module. Use default values for this example.
If you do not want to go through each screen in the Create wizard, click Finish
Click Finish.
Click Next.
Click Next