Rockwell Automation 5720 DriveLogix System - Manual (Page 79)

Publication 20D-UM002C-EN-P - November 2003
Placing and Configuring the Drive 3-21
Using Existing DriveExecutive Lite Files
Before using an existing DriveExecutive Lite file, verify the firmware revision,
communication format, and power rating in the drive file match the data
entered in drive module properties in your DriveLogix application.
1. Select Properties from the Drive menu.
2. View revision and ratings on the General tab of the Properties window.
3. Refer to Viewing the Communication Interface to the Controller on page 3-18, to view the communication format.