Rockwell Automation 5720 DriveLogix System - Manual (Page 249)

Publication 20D-UM002C-EN-P - November 2003
Installing and Maintaining the Battery B-5
10. Secure the new battery by installing a new cable tie.
11. Re-install the control assembly, if removed.
12. Turn on power to the DriveLogix controller.
13. On the front of the controller, is the BATTERY LED off?
14. Download the controller’s memory and program from the computer
with RSLogix 5000 programming software.
15. Turn off power to the DriveLogix controller.
16. Re-install the cover(s).
17. Dispose the old battery according to state and local regulations.
If: Then:
Yes Go to the next step.
No A. Check that the battery is correctly connected to the controller.
B. If the BATTERY LED remains on, install another 1756-BA1 battery.
C. If the BATTERY LED remains on after you complete Step B., contact
your Rockwell Automation representative or local distributor.
ATTENTION
!
Do not incinerate or dispose lithium batteries in
general trash collection. They may explode or
rupture violently. Follow state and local regulations
for disposal of these materials. You are legally
responsible for hazards created while your battery is
being disposed.